47503 DC Motor Control DMC: The DC motors do not support synchronous movement At this time, a synchronous movement requires that the DC motors exist on the same GENINE board. If using monitor commands, verify the motor names entered with the monitor command. The monitor command dmc info will identify the motor names of the DC motors supported by the product. If the error is generated internally, the error is an internal error. If using monitor commands, verify the motor names entered with the monitor command. Otherwise call service. This error is reported. The DC motors do not exist on the same GENINE board. Firmware error that will occur during firmware development and testing. 28-Jul-2006 ../commands/dmc_info.xmlCommand: dmc info ..\..\ShowAllErrors.htmFirmware 1 Error Index ..\..\ShowAllCommands.htmFirmware 1 Command Index ..\..\ShowAllParameters.htmFirmware 1 Parameter Index Updated: Thu Jul 17 07:23:52 2008 PST